Ellipsoidals

LEDko DIM

LEDko DIM is the phase dimmable version of the iconic LEDko.

This version can be powered by traditional dimmers and therefore represents a perfect refitting solution in all installations where traditional dimmers are still in use.
An external dimming knob allows this version to be controllable through traditional dimmers, DMX or in a stand-alone basis.
Both Tungsten (3.200 K) and Daylight (5.600 K) versions available.


Tungsten
Daylight
LEDko DIM
Tungsten
Specifications
  • Fixed white CCT 3.200 K
  • CRI 80, TLCI 65 / CRI 90, TLCI 88
  • 3 selectable curves: Xeno, Tungsten, Reverse, Normal
  • Synchronized, random or pulse electronic strobe
  • Four blade framing system, each shutter blade is adjustable for radial position and angle
  • Swappable lens tubes between 5°–90°
  • Camera flicker control/Hz range from 600 Hz to 1.500 Hz
  • Calibrated Cob
  • Pattern projection
  • Pattern size: A or B
  • Ambient Operating Temperature from 0°C to 40°C (from 32°F to 104°F)
  • 3 different fan settings: Low, Auto, DMX Regulated
  • Manual Yoke, Pole Operated Pan-Tilt-Zoom (Accessory)
  • Flame-retardant technopolymer reinforced with fiberglass
  • Four stainless steel shutter blades in a two-plane assembly, 0.40mm (AISI 316)
  • Thermally insulated knobs and shutter handles
  • IP20
  • Black body (standard), custom color on request (optional)
Light source
Tungsten COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
  • Length: 362mm / 14.25in (body) - 601mm / 23.66in (with Profile Zoom 28°/40° optic)
  • Width: 212mm / 8.35in
  • Height: 189mm / 7.44in - 372mm / 14.64in (with bracket)
  • Weight: 6kg / 13.22lbs (body) - 8.5Kg / 18.74lbs (with Profile Zoom 28°/40° optic)
control protocol and programming
  • DMX512, Dimming controlled via standard external power dimming unit or with potentiometer knob
  • RDM: DMX Setup, Fixture Status, RDM Commands
  •  DMX Channels: 5
  • Setting, addressing, testing and measurements via LEDs display
Electrical specifications connections
  • 90-230V, 50/60Hz, auto-sensing
  • 200W Maximum – 0.86 A at 230 V, 1.76 A at 115 V – cosφ 0,99
  • In and Out PowerCON TRUE1 connectors to feed up to 8 (at 230V) or 4 (at 115V) fixtures
  • In and Out DMX 5 pin locking XLR connectors
Accessories
  • 1.5 m power cable with PowerCON TRUE1 Top and bare ends, included (GKIT17, USA / GKIT16, EU)
  • Metal Gobo Holder (BC10011A106)
  • Optics: Profile/Soft Profile, Zoom Profile, Lens tube available in various angles
  • Front Barrel with Burnished Blades (BC10011A000)
  • 4-Leaf Barndoor (BC10034A003)
  • Magnetic Gobo Holder (BC10011A006)
  • Gobo Holder for Glass Gobo (BC10011A030)
  • Iris (BC10011A010)
  • Gobo Holder for Iris Slot (BC10011A049)
  • Hook Clamp available in various models
  • Light Clamp available in various models
  • Clamp available in various models
  • Wireless Kit, LumenRadio (BC10011A100)
  • Pole Operated Yoke (BC10011A150)
  • Donut available in various sizes
  • Half Top Hat available in various sizes
  • Top Hat available in various sizes
  • Color Frame Holder available in various sizes
LEDko DIM
Daylight
Specifications
  • Fixed white CCT 5.600 K
  • CRI 80, TLCI 72 / CRI 90, TLCI 91
  • 3 selectable curves: Xeno, Tungsten, Reverse, Normal
  • Synchronized, random or pulse electronic strobe
  • Four blade framing system, each shutter blade is adjustable for radial position and angle
  • Swappable lens tubes between 5°–90°
  • Camera flicker control/Hz range from 600 Hz to 1.500 Hz
  • Calibrated Cob
  • Pattern projection
  • Pattern size: A or B
  • Ambient Operating Temperature from 0°C to 40°C (from 32°F to 104°F)
  • 4 different fan settings: Low, Auto, DMX Regulated
  • Manual Yoke, Pole Operated Pan-Tilt-Zoom (Accessory)
  • Flame-retardant technopolymer reinforced with fiberglass
  • Four stainless steel shutter blades in a two-plane assembly, 0.40mm (AISI 316)
  • Thermally insulated knobs and shutter handles
  • IP20
  • Black body (standard), custom color on request (optional)
Light source
Daylight COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
  • Length: 362mm / 14.25in (body) - 601mm / 23.66in (with Profile Zoom 28°/40° optic)
  • Width: 212mm / 8.35in
  • Height: 189mm / 7.44in - 372mm / 14.64in (with bracket)
  • Weight: 6kg / 13.22lbs (body) - 8.5Kg / 18.74lbs (with Profile Zoom 28°/40° optic)
Control protocol and programming
  • DMX512, Dimming controlled via standard external power dimming unit or with potentiometer knob
  • RDM: DMX Setup, Fixture Status, RDM Commands
  •  DMX Channels: 5
  • Setting, addressing, testing and measurements via LEDs display
Electrical specifications connections
  • 90-230V, 50/60Hz, auto-sensing
  • 200W Maximum – 0.86 A at 230 V, 1.76 A at 115 V – cosφ 0,99
  • In and Out PowerCON TRUE1 connectors to feed up to 8 (at 230V) or 4 (at 115V) fixtures
  • In and Out DMX 5 pin locking XLR connectors
Accessories
  • 1.5 m power cable with PowerCON TRUE1 Top and bare ends, included (GKIT17, USA / GKIT16, EU)
  • Metal Gobo Holder (BC10011A106)
  • Optics: Profile/Soft Profile, Zoom Profile, Lens tube available in various angles
  • Front Barrel with Burnished Blades (BC10011A000)
  • 4-Leaf Barndoor (BC10034A003)
  • Magnetic Gobo Holder (BC10011A006)
  • Gobo Holder for Glass Gobo (BC10011A030)
  • Iris (BC10011A010)
  • Gobo Holder for Iris Slot (BC10011A049)
  • Hook Clamp available in various models
  • Light Clamp available in various models
  • Clamp available in various models
  • Wireless Kit, LumenRadio (BC10011A100)
  • Pole Operated Yoke (BC10011A150)
  • Donut available in various sizes
  • Half Top Hat available in various sizes
  • Top Hat available in various sizes
  • Color Frame Holder available in various sizes