Ellipsoidals

LEDko EXT +

The LEDko EXT family has been designed to meet the needs of architects and lighting designers, who were looking for weatherproof lighting fixtures suitable not only for temporary, but also for permanent outdoor installations.
contact us

Outdoor LED profile fixture. This IP 65 rated fixture replicates the performance of the indoor version. It comes in different fixed versions of CCT (3.200 K or 5.600 K) or FullSpectrum color (RGBLA). The LEDko EXT includes a zoom lens system ranging from 10 t o 25 degrees, 14 t o 35 degrees, 30 t o 60 degrees or 80° optic . A gobo holder, bare ends power input cable and in/out 5 pin XLR IP 65 rated connectors for the DMX signal. The display is lockable thanks to a freely selectable security pin code. Designed with new electronic and a new OLED display, this spot profile projector is the evolution of the Daylight.

The + electronic with advanced LED controller enables a smooth dimming and it offers and higher luminous efficiency.

contact us
PDF
Download center
Tungsten
Daylight
FullSpectrum RGBLA
LEDko EXT +
Tungsten
Specifications
  • Fixed white CCT 3.200 K
  • CRI > 80, CRI >90
  • 8 or 16 bit, 6 selectable curves: Exponential, Logarithmic, Linear, Halo, Standard and S
  • Fast, Slow and Very Slow Dimming Smooth Selection
  • Synchronized, random or pulse electronic strobe
  • Four blade framing system, each shutter blade is adjustable for radial position and angle
  • Profile zoom from 14° to 35°, 10° to 25°, 30° to 60° and optic 80°
  • Camera flicker control/Hz range from 600 Hz to 20.000 Hz
  • Calibrated Cob
  • Pattern projection
  • Pattern size: A or B (Gobo outside diameter= 86 mm / 3.38 in, Max image diameter= 64.5 mm / 2.53 in)
  • Ambient Operating Temperature from -40°C – +40°C (-40°F – 104°F)
  • 4 different fan settings: Silent, Studio, Auto, DMX Regulated
  • Manual Yoke
  • Die-cast aluminium (Anti-Salt treatment)
  • EPA: Projector front area – 32239.2 sq.mm (0.3470 sq.ft), projector side area – 160176 sq.mm (1.72404 sq.ft
  • IP65
  • Black body (standard), custom color on request (optional)
Light source
Tungsten COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
  • 14°-35° Optic
    • Length: 687.8mm / 27.07in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 14.0Kg / 30.8lbs
  • 10°-25° Optic
    • Length: 807.7mm / 31.8in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 15.0Kg / 33.1lbs
  • 30°-60° Optic
    • Length: 580mm / 22.83in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 12.6Kg / 27.7lbs
  • 80° Optic
    • Length: 500mm / 19.68in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 12.1Kg / 26.6lbs
control protocol and programming
  • DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
  • RDM: DMX Setup, Fixture Status, RDM Commands (only DMX version)
  • DMX Channels: 5 / 1
  • Graphic OLED
  • Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
  • 80-264V, 50/60Hz, auto-sensing
  • 200W Maximum – 0.92 A at 230 V, 1.83 A at 115 V – cosφ 0,95
  • 1.5 m Integral cable Bare Ends
  • In and Out DMX 5 pin locking XLR connectors IP65
Accessories
  • Removable four blade framing system with gobo holder (BC10028A000)
  • Frame Holder, included (BC10029A003)
  • LEDko EXT DMX wireless kit (BC10029A100)
  • Profile Zoom 10°-25° (BC10029A002)
  • Profile Zoom 14°-35° (BC10029A000)
  • Profile Zoom 30°-60° (BC10029A004)
  • Lens Tube Profile 80° (BC10029A005)
LEDko EXT +
Daylight
Specifications
  • Fixed white CCT 5.600 K
  • CRI > 80, CRI >90
  • 8 or 16 bit, 6 selectable curves: Exponential, Logarithmic, Linear, Halo, Standard and S
  • Synchronized, random or pulse electronic strobe
  • Four blade framing system, each shutter blade is adjustable for radial position and angle
  • Profile zoom from 14° to 35°, 10° to 25°, 30° to 60° and optic 80°
  • Camera flicker control/Hz range from 600 Hz to 20.000 Hz
  • Calibrated Cob
  • Pattern projection
  • Pattern size: A or B (Gobo outside diameter= 86 mm / 3.38 in, Max image diameter= 64.5 mm / 2.53 in)
  • Ambient Operating Temperature from -40°C – +40°C (-40°F – 104°F)
  • 4 different fan settings: Silent, Studio, Auto, DMX Regulated
  • Manual Yoke
  • Die-cast aluminium (Anti-Salt treatment)
  • EPA: Projector front area – 32239.2 sq.mm (0.3470 sq.ft), projector side area – 160176 sq.mm (1.72404 sq.ft
  • IP65
  • Black body (standard), custom color on request (optional)
Light source
Daylight COB LED, L80 Rating, 50.000 hours to 80% output
Physical size
  • 14°-35° Optic
    • Length: 687.8mm / 27.07in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 14.0Kg / 30.8lbs
  • 10°-25° Optic
    • Length: 807.7mm / 31.8in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 15.0Kg / 33.1lbs
  • 30°-60° Optic
    • Length: 580mm / 22.83in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 12.6Kg / 27.7lbs
  • 80° Optic
    • Length: 500mm / 19.68in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 12.1Kg / 26.6lbs
Control protocol and programming
  • DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
  • RDM: DMX Setup, Fixture Status, RDM Commands (only DMX version)
  • DMX Channels: 5 / 1
  • Graphic OLED
  • Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
  • 80-264V, 50/60Hz, auto-sensing
  • 200W Maximum – 0.92 A at 230 V, 1.83 A at 115 V – cosφ 0,95
  • 1.5 m Integral cable Bare Ends
  • In and Out DMX 5 pin locking XLR connectors IP65
Accessories
  • Removable four blade framing system with gobo holder (BC10028A000)
  • Frame Holder, included (BC10029A003)
  • LEDko EXT DMX wireless kit (BC10029A100)
  • Profile Zoom 10°-25° (BC10029A002)
  • Profile Zoom 14°-35° (BC10029A000)
  • Profile Zoom 30°-60° (BC10029A004)
  • Lens Tube Profile 80° (BC10029A005)
LEDko EXT +
FullSpectrum RGBLA
Specifications
  • RGBCLA (Red, Green, Blue, Cyan, Lime, Amber) color mixing with hue and saturation control
  • CRI > 80, CRI >90
  • 8 or 16 bit, 6 selectable curves: Exponential, Logarithmic, Linear, Halo, Standard and S
  • Synchronized, random or pulse electronic strobe
  • Four blade framing system, each shutter blade is adjustable for radial position and angle
  • Profile zoom from 14° to 35°, 10° to 25°, 30° to 60° and optic 80°
  • Camera flicker control/Hz range from 600 Hz to 20.000 Hz
  • Calibrated Cob
  • Pattern projection
  • Pattern size: A or B (Gobo outside diameter= 86 mm / 3.38 in, Max image diameter= 64.5 mm / 2.53 in)
  • Ambient Operating Temperature from -40°C – +40°C (-40°F – 104°F)
  • 4 different fan settings: Silent, Studio, Auto, DMX Regulated
  • Manual Yoke
  • Die-cast aluminium (Anti-Salt treatment)
  • EPA: Projector front area – 41599.2 sq.mm (0.4476 sq.ft), projector side area – 192211 sq.mm (2.0689 sq.ft
  • IP65
  • Black body (standard), custom color on request (optional)
Light source
RGBLA LEDs module, L80 Rating, 50.000 hours to 80% output
Physical size
  • 14°-35° Optic
    • Length: 687.8mm / 27.07in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 14.0Kg / 30.8lbs
  • 10°-25° Optic
    • Length: 807.7mm / 31.8in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 15.0Kg / 33.1lbs
  • 30°-60° Optic
    • Length: 580mm / 22.83in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 12.6Kg / 27.7lbs
  • 80° Optic
    • Length: 500mm / 19.68in
    • Width: 252.6mm / 9.94in
    • Height: 185mm / 7.28in - 405 mm / 15.94in (with bracket)
    • Weight: 12.1Kg / 26.6lbs
Control protocol and programming
  • DMX-512, RDM (Remote Device Management), Wireless (optional By LumenRadio)
  • RDM: DMX Setup, Fixture Status, RDM Commands (only DMX version)
  • DMX Channels: 16 / 7 / 1 / Studio mode / RGB mode
  • Graphic OLED
  • Firmware upgrade through DMX with RDM Upgrade USB interface (code AC10011A001)
Electrical specifications connections
  • 80-264V, 50/60Hz, auto-sensing
  • 250W Maximum – 1.16 A at 230W, 2.34 A at 115W – cosφ 0.93
  • 1.5 m Integral cable Bare Ends
  • In and Out DMX 5 pin locking XLR connectors IP65
Accessories
  • Removable four blade framing system with gobo holder (BC10028A000)
  • Frame Holder, included (BC10029A003)
  • LEDko EXT DMX wireless kit (BC10029A100)
  • Profile Zoom 10°-25° (BC10029A002)
  • Profile Zoom 14°-35° (BC10029A000)
  • Profile Zoom 30°-60° (BC10029A004)
  • Lens Tube Profile 80° (BC10029A005)
Ralated products
Ellipsoidals

MiniLEDko Profile

IP20
Ellipsoidals

LEDko +

IP20
Ellipsoidals

LEDko HD +

IP20
Ellipsoidals

LEDko SHHH
case history